networking / advanced hmi

wancues

Member
wancues
Join Date
Nov 2012
Location
moxee
Posts
49
I have been playing with the advanced hmi for the past month or so. the first 2 that i set up worked great and i am able to connect to the plc form computers witch use dhcp. but to night i set one up and the only way i can connect to the plc is to manually set the ip. any thoughts ???
 
Update
found it the problem was in the sub net ie 255.255.255.0 in the plc had to open it up to 255.255.0.0
 

Similar Topics

iadapt
Best PLC & Advanced Networking Training
Just wondering where you guys think the best place to get training is? Considering, DCS, Networking, PLC Programming - Micrologix 500/5000...
Replies
3
Views
2,658
iadapt
iadapt
The Plc Kid
Advanced Networking Help
Guys i am in neede of some very advanced networking advice. I have a system with contrologix cpu,enbt,panelview +,Versaview Panel PC,flex...
Replies
12
Views
3,335
todster
T
Russ
Networking issues, and am curious about Produce/Consume versus MSG: (Allen Bradley PLCs)
I have a client who periodically experiences network communication issues. Sometimes when I VPN into the site, their SCADA systems will flash comm...
Replies
2
Views
170
Ken Roach
Ken Roach
M
IP networking and static IP address
guys: I have a problem with my IP configuration. my organization networking has 2 subnets. 10.0.0.25 and 10.1.0.25 both under 255.255.255.0 all...
Replies
2
Views
565
harryting
H
M
PLC Networking IP setting and subnetting
I have a question about IP addressing and Networking. I have a PLC with following IP address 10.1.0.120 this is an static PLC PLC is working like...
2
Replies
15
Views
2,005
widelto
widelto
Back
Top Bottom