Regarding the plc memory
- Thread starter RTV
- Start date
Similar Topics
I know this can be done, but I can't get the router config right.
My goal is to physically connect(using an ethernet cable) a device(PLC, RTU...
I have to control a bi- directional dc motor. The whole control of dc motor would be through a motor driver that would be connected to PLC. The...
How I can connect Kiosk to a Plc ? I want input from the kisok and then plc would do the required work. Please answer this question
I have to use more than 40 servo motors and 20+ load cells using PLC. But the problem is that I have to use many I/o modules ( that is costly and...
I have to use more than 40 servo motors and 20+ load cells using PLC. But the problem is that I have to use many I/o modules ( that is costly and...