Panelbuilder to FT ME converison/Scaling

Adam303 · Aug 30, 2013

Hi Fellas
I’m migrating from a Panelview Standard to a Panelview plus, I have several Numeric displays setup that need to be scaled prior to display. In Panelbuilder if you select the Numeric Display and select Edit Tag below that is a window called Scaling, I don’t see how I can accomplish this is FT ME. Any pointers.
I have a INT that has to be displayed with a cursor point 1852 must be as 18.52

Thanks

maxketcham · Aug 30, 2013

if you are using a numeric display and you would want 1852 to be 18.52 then connections tab use the expression editor and enter the expression "Variable/100" to display what you want. where variable is the tagname that is equal to 1852

Adam303 · Aug 30, 2013

Thanks maxketcham

maxketcham · Aug 30, 2013

anytime

Adam303 · Sep 1, 2013

One more question, in Panel Builder for a Numeric Entry under Tag Edit I able to enter an initial Tag value, anyway this could be done in FT ME.
Thanks

maxketcham · Sep 1, 2013

Adam303 said:
One more question, in Panel Builder for a Numeric Entry under Tag Edit I able to enter an initial Tag value, anyway this could be done in FT ME.
Thanks

Not quite sure what you mean, but if you mean can you give the variable a default starting value, I do not think so. Anyone else know for sure?

Panelbuilder to FT ME converison/Scaling

Adam303

Lifetime Supporting Member

maxketcham

Lifetime Supporting Member

Adam303

Lifetime Supporting Member

maxketcham

Lifetime Supporting Member

Adam303

Lifetime Supporting Member

maxketcham

Lifetime Supporting Member

Similar Topics