can't connect to PCI2000ETH

Have you:

- Activated the correct protocols?
- Correctly configured the PCI2000ETH card?
- Correctly configured the connecting partner's ethernet card?
- Correctly configured the subnet mask?
- Initialized the board?
- Created topic for the card to read?

Can you ping both the PCI2000ETH and the connecting partner when connecting a PC to the network?


For future posts/thread, please state the manufacturer of the device.
I'm guessing it's a BradComm Applicom card.
 
first thank you
before I used IP address can't connect the PLC
and I Last try to use ISO ,and it can connect to PLC
i don't the reason why can't use the IP
 

Similar Topics

Hello, friends, I am trying to upgrade a system that uses an Onrom incremental encoder (E6B2-CWZ6C) connected to a Danfoss VFD (FC360), but now...
Replies
4
Views
249
I will find cable series but I don't know for fs260 model, kindly suggestions and help to me for connect cable
Replies
1
Views
95
Hi all, I'm having difficulties trying to connect FactoryTalk View SE Local Station (V13.00) to MS SQL Server Express. I state that they are...
Replies
2
Views
109
I am using Mitsubishi PLC :FX3g and downloaded the program in it. When I connect Mitsubihi FX2N-4DA expansion module, it lost its communication...
Replies
3
Views
243
Hi, The VersaMax PLC suddenly stop running (no LED on run function) so I'm trying to upload the program. The HMI connected to it says "Host...
Replies
0
Views
117
Back
Top Bottom