LogicWorld8
Member
Does anybody have an idea on how to display lights on an OLED sheet through a PLC?
Using a PLC to project a display on an OLED
- Thread starter LogicWorld8
- Start date
BryanG
Member
Don't know if this is what you mean. You can get OLED displays with a built in RS232 or RS485 connection.
https://www.sparkfun.com/products/11676
https://www.sparkfun.com/products/449
Then you can just squirt out ASCII data to tell the display what to do. With a bit of careful programming you can display shapes as well as text.
https://www.sparkfun.com/products/11676
https://www.sparkfun.com/products/449
Then you can just squirt out ASCII data to tell the display what to do. With a bit of careful programming you can display shapes as well as text.
Similar Topics
Hello everyone,
I am a newbie in automation stuff and i wanted to do a simple thing with just a sensor, a blade and a plc.
My aim is this - The...
Hi everyone,
I am trying to create a medium sized Citect SCADA project utilising a Control Logix PLC.
I want to adopt good practice from the...
is there any one can send me the list of project that can be made by using PLC for engineering students
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...