Real time clock CX Programmer

tonehunta

Member
tonehunta
Join Date
Feb 2013
Location
Mamoudzou
Posts
9
Hey everyone

I've been struggling with real time clocks on cx-programmer;). Basically what I wanted to do was to increment different words (UDINT data type) according to the the different hours during a day. Let's pick an example, if an output goes ON between 6AM-7AM, then word W500 is incremented although if the same output goes ON at 8PM the word W600 is incremented. I don't know if I'm being clear, but I truly hope you guys can fill me in.:nodi:

Thanks in advance
 
What is the purpose ? E.g. are you trying to accumulate the ON time of an output ? For some timing functions a counter may work better.
 
Omron PLCs are extremely powerful and simple to use once you get your head around them. Love programming with numbers and not stupid symbols - old timer.
Hope it helps.
 

Similar Topics

A
Melsec real-time clock resolution
Hello. This is one for the Mitsubishi experts. I need to measure the time for a remote device's to return process data sent from the i-QR...
2
Replies
17
Views
2,118
parky
P
S
MicroLogix 1400--write to (adjust) real time clock
Hi all I thought I had this working but upon doing a checkup a few months after the machine was commissioned, I found that adjusting the RTC via...
Replies
4
Views
1,847
Kidblue
Kidblue
R
omron cp1e real time clock
hi all i have used a real time clock to turn on a bit after 1 month. the plc was off for this whole month and when i turned on the plc after a...
Replies
2
Views
1,417
RAJNAIK
R
N
how to export real time clock from pabelview 800 to micro 850
hey, anyone know how to export time from panelview 800 to micro 850 and to compare time? or distinguish various time , like to know which shift...
Replies
1
Views
1,442
tarik1978
T
S
changing real-time clock values via HMI
Hi again Looking to write date or time values to the RTC in my MicroLogix 1400 In the ladder logic I am using a CPW instruction as per the 1400...
Replies
13
Views
3,230
Aabeck
Aabeck
Back
Top Bottom