SLC Memory upgrade
- Thread starter Hundikoer
- Start date
Similar Topics
Hello PLC friends. I've been going through a saga of diagnosing and fixing an old PLC setup that I inherited. I am learning as I go.
Initial...
My client has 3x 1747-L552 SLC 5/05 plc's on site with 32k memory that we'd like to update the firmware on. I have a test plc which I've already...
I was working on some SLC's over the weekend and powered down the controls on both as we worked on the system they controlled. When I powered back...
Customer is trying to save money and get a PLCs with less memory if the existing program will fit.
They are concerned that the PLC program may be...
Servicing PLC with 5/04 processor. It was displaying BATT error and program was gone. I replaced battery, reloaded program put it in Run mode...
