Mtn_Bkng_Dave
Member
Does anyone know of a quick and painless way to convert a double integer (say like the integral sum in a PID) to a float in an SLC 5/05?
Thanks,
Dave
Thanks,
Dave
Double integer conversion
- Thread starter Mtn_Bkng_Dave
- Start date
Similar Topics
Hi,
In Proficy Historian I have a tag connected with Double Integer / DWord configuration. In the PLC it is a Time format. Can that be a problem...
Hi
I have an application need send some position data to Mitsubishi A800 drive via Modbus rtu. I have double integer value in plc. There are two...
Hi All,
Now i get a problem about converting from Time string to double integer. I used FC37 to convert it but after converting it, DINT value got...
Hello everyone!
I am trying to figure out how a word - 16 bit can be translated into a double integer (%MD) in Pl7 .
Currently the application...
I have configured a ML 1100 for modbus communication through its serial port.Then moved a float value to two input registers.(decimal values in...
