Hmi gt2220

rahimi

Member
R
Join Date
Sep 2013
Location
Tehran
Posts
7
Hello
I have a HMI GT2220 from telemecanique.
I have a problem connecting it with a plc.
I defined an external variable (with a specific address in PLC) in vijeo designer. Now I want to connect it via modbus to plc (also telemecanique). I tried two different connection: modbus RTU, modbus RTU slave
But the data cannot be read from the plc.

Does anyone know how to define the HMI master with a specific address?
thank you so much
 

Similar Topics

N
Schneider XBTGT2220 (Magelis) HMI panel
Hi Guys, I do have a problem with a HMI panel. The old one is broken, and i cannotr seem to get the progeam running on the new HMI Panel. We...
Replies
6
Views
4,376
r33k
R
M
HMI Connection - {::[PLC1]Program:#1.#3.Abc.Efg} What is the #1.#3 ?
I'm having a hard time either remembering or figuring this out. I have a PLC program and the associated HMI program. I know what this means...
Replies
4
Views
100
plvlce
P
X
Detection of HMI Status in the PLC ?
Hello, I'm working with Studio 5000 and ME Station, and I'm trying to find a way to detect if the PC with the HMI is shut down or not. I've tried...
Replies
5
Views
140
Ken Roach
Ken Roach
N
RSLogix5000 --> C-More HMI; Array --> Text String
Hello everyone, Wondering if anybody can help me with this: I have a CompactLogix processor running a little robot cell. Every 200 cycles...
Replies
8
Views
161
nutcase511
N
B
Simulate Siemens HMI to PLC through NAT connection
Hello, I have an issue where I want to simulate an Siemens HMI panel, through NAT connection to a PLC. I have the possibility through extended...
Replies
5
Views
159
Ben93
B
Back
Top Bottom