Error in TSX17-10

cezarc

Member
C
Join Date
Sep 2013
Location
Romania
Posts
6
Hello,

My TSX17-10 give on error...I/O/MEM LED blink intermittent... and from TSXAP707M manual this means - "PLC memory not initialized: blank cartridge (first power-up) or back-up memory endurance exceeded."...
- "• Check the condition of the battery...• Initialize the memory from the terminal by completely erasing the memory (CLEAR MEMORY, CLM)."
I read eeprom and it seems that is ok....

Please advice...
 
Your gonna have to contact schneider. I have an old ftx517 terminal still running with os/2 and x-tel. Schneider can assist in creating a boot-disk for pc so you can run the software required
 

Similar Topics

P
Communication Between Compact Logix and Guard Logix Error
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
39
Ken Roach
Ken Roach
A
I/O access error on S7-300
Hi Siemens guys! I am experiencing SF fault on our S7-300 (6ES7 315-2AH14-0AB0) CPU from time to time. I've checked the diagnostic buffer and...
Replies
13
Views
162
JesperMP
JesperMP
S
Plc power indicator on but run and error indicators off
Hello..I am new to Plc.I have Mitsubishi Melsec Fx3Ga-40MR PLC controlling a machine for packing powder.Currently the Plc has issue which power...
Replies
3
Views
129
parky
P
A
sepro robot error code 3
hello, I'm a student and for my final grade I have to repare a sepro robot. the only problem I have for now is that i have an error code 3...
Replies
0
Views
35
aleksander990
A
A
Error 36 in microwin modbus rtu
Dear All, i am trying to connect Danfoss inverter with s7 200 cpu 226.but microwin shows following error at DATA Ptr.i assigned different VB...
Replies
1
Views
45
BryanG
B
Back
Top Bottom