How to simulate Unity with Citect.

Hello!

I'm sorry, because I'm newbie in this area.
I doing my Final Grade Project about Scada Citect, with the PLC MODICON M340.
First, I trying to simulate Unity with Citect, before to link to the PLC.

I opened the Vijeo Citect, and I kept the connection wizard, (this tutorial) but in the end of it, it had an error: "Impossible to import tags".

I know that I can linked it by OPC, but I believe that it would possible in the above way. (is all of Schneider)

Thanks!

In Vijeo Citect create a modbus/tcpip connection and use the adress 127.0.0.1
Run simulator in unity and it should be linked

chud said:

In Vijeo Citect create a modbus/tcpip connection and use the adress 127.0.0.1
Run simulator in unity and it should be linked

Click to expand...

I don't know to create the connection that you say. I kept de connection wizard, map the IP 127.0.0.1 and port 502, and it had an error.

Help me please!

are you running the unity plc simulator?

V0N_hydro said:

are you running the unity plc simulator?

Click to expand...

Yeah!