Mr_Wizard
Member
Hello all. Noob here.
Hopefully someone here has had experiences with this. I'm trying to 'share' data tags from multiple G3's to be read/write on a single G3. I've read a bit on a OPC, but it seems that Crimson 3 no longer has OPC Server service.
Basically, I have multiple PLC's connected to a single G3 with read/write access. With a few of these setups over Modbus TCP/IP connections. I'm trying to connect to the G3's with a single HMI to control all the PLC's connected without having to map directly to each PLC.
I've attached a diagram of what I'm trying to accomplish.
-- Seeing if the Green G3 will used the tags in the Blue G3's with read/write access.
Thanks!
Hopefully someone here has had experiences with this. I'm trying to 'share' data tags from multiple G3's to be read/write on a single G3. I've read a bit on a OPC, but it seems that Crimson 3 no longer has OPC Server service.
Basically, I have multiple PLC's connected to a single G3 with read/write access. With a few of these setups over Modbus TCP/IP connections. I'm trying to connect to the G3's with a single HMI to control all the PLC's connected without having to map directly to each PLC.
I've attached a diagram of what I'm trying to accomplish.
-- Seeing if the Green G3 will used the tags in the Blue G3's with read/write access.
Thanks!