Schneider TSX3721101 PLC interfacing with Computer

ssana168

Member
S
Join Date
Jun 2011
Location
Pakistan
Posts
38
Dear all,
Can i use computer to run Schneider TSX3721101 PLC. If it is possible to use computer as an HMI, than please tell me the name of the software to create HMI program and run directly on computer.
 

Similar Topics

M
Pack drive elau Schneider ISH-100
I am using Schneider elau pack drive servo motor ISH-100. I am facing the problem that On the ISH -100 red light is blinking and pack drive C-600...
Replies
0
Views
9
Munish
M
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
63
Para
P
J
Schneider M221 ModBus RS-485 Communication
Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
166
jillgeorge18
J
S
Schneider plc SR2A201BD programming cable
Hi Please I have zeilo smart relay #SR2A201BD but I don't have it's programming cable. Can I use any general usb/rs232 converter? Or need...
Replies
3
Views
118
Zimmer
Z
E
M241 - Schneider - Upload
Hello, Recently I was asked to analyze the logic of the air conditioning system in one of our departments. The PLC that controls this system is...
Replies
2
Views
144
edrHeihel
E
Back
Top Bottom