Connecting A MAC Bullet Valve Cartridge to PLC

Good day all. I would like to connect a Mac Bullet Valve cartridge to my MicroLogix 1200 PLC. The Mac Bullet Valve shall be used as an output to control vacuum suction. There is a blue wire that goes to common, a brown that goes to +24 Volts and the Black wire goes to the output terminal.

I am not sure if that is a statement or a question but either way you have something wrong. As far as I know bullet valves only have single acting solenoids, you have too many wires.

A part# on the valve you want to hook up would be helpful. Along with with micrologix output you are planning on using.