s7 redundent CPU 414-4H master cpu all leds is flashing

ahmed megahed

Member
A
Join Date
Nov 2010
Location
na
Posts
26
Dear all

i oome to find that my master cpu all leds is flashing and as per manual this means that CPU is faulty

so can u advise, is it mandatory to change it or there is some how way to be ok again ?

o_Ođź“š:sick:o_O
 
is it possiable to replace the faulty cpu with the same with version v4.0.11 and the other one is version v4.0.10
 

Similar Topics

A
siemens s7 414-4h redundent CPU problem
dear all experts one day i found that the master cpu's all leds is flashing and control transfered to the slave one after trouble shooting the...
Replies
1
Views
3,082
ahmed megahed
A
I
Redundent OPC servers to an OPC client
Hello, I am trying to connect kepServerEx v5 in parallel with RSLinx Classic lite but kepserver will not connect to the PLC if RSLinx is active...
Replies
4
Views
2,104
harryting
H
E
SLC50-5 redundent
i have two plc slc5-05 1747-L553 and 1747-bsn backup scanner my quastion , how i can transfer data table between two plc ?
Replies
0
Views
1,440
Eng:Hazem
E
N
Redundent wincc+client+OPC XML DA??
Dear All, My config as follows. - 1 pair of Redundent WinCC - 1 WinCC Client - OPC XML DA installed on client - MES will access Wincc Data...
Replies
0
Views
3,155
naishadgosai
N
M
DL205-1 CPU Monitoring
Hello everyone! I need to connect to a DL205-1 CPU and, as far as I know, I need to use DirectSOFT 6 software for the connection. Is anyone...
Replies
1
Views
64
bernie_carlton
bernie_carlton
Back
Top Bottom