Hi
I have just installed the Rockwell Faceplate for the 1769-L3x Controllers. Its working well however the memory is not displaying properly. I opened up the face plate and did some digging around. I discovered an unusual (well at least to me) sintax. The tag is as follows:
{#2@TotalMemDT}
Now I know that #2 is from a parameter file and the associated parameter file in this case has #2 as a link to the controller however I have never come across the "@" notation before.
I´ve tried searching the knowledge base and also tried to talk to live chat (been waiting for over 30min). I also tried the help files of both Studio 5000 and FTVS ME 7.00 both with no success.
Can anyone help me figure out whats going on here?
Thanks
Regards
Ian
I have just installed the Rockwell Faceplate for the 1769-L3x Controllers. Its working well however the memory is not displaying properly. I opened up the face plate and did some digging around. I discovered an unusual (well at least to me) sintax. The tag is as follows:
{#2@TotalMemDT}
Now I know that #2 is from a parameter file and the associated parameter file in this case has #2 as a link to the controller however I have never come across the "@" notation before.
I´ve tried searching the knowledge base and also tried to talk to live chat (been waiting for over 30min). I also tried the help files of both Studio 5000 and FTVS ME 7.00 both with no success.
Can anyone help me figure out whats going on here?
Thanks
Regards
Ian