Prosoft module MVI56 SIE on Vipa PLC

Hi guys,
I have a question about using module MVI56E-SIE to CLX frame for communication with VIPA 300S Speed7. I know that is this module dedicated to Siemens S7 PLC and Vipa is like Siemens.
Does someone have any experiences with this configuration?
Thanks

Dobre den,

If all you need to do is pass data from one PLC to the other, I would use a gateway instead, such as:
http://www.anybus.com/support/support.asp?PID=165&ProdType=Anybus X-gateway
or
http://www.anybus.com/support/support.asp?PID=301&ProdType=Anybus X-gateway

As the 2 sides of the gateway are galvanically isolated, If there is some problem on one of the networks, the gateway will isolate the problem to that side.

My 2 cents