fx3u timer issue

mr bean

Member
M
Join Date
Aug 2011
Location
NY
Posts
5
I am programming a Mitsubishi fx3u-48m PLC. I am trying to move different times into my timers. how would I go about doing this.
 
by using a data register rather then a constant(K) you can write new presets to the data register from an hmi or from within your program
 

Similar Topics

G
The larger the program, the slower Modbus becomes. (FX3U low-cost Chinese PLC)
I'm a beginner in the automation field and I've set up an automation system connecting several devices (datalogger, radio, etc.) via Modbus RS485...
Replies
5
Views
215
lfe
L
C
PLC Program Misubishi FX3U
Hi All, want to ask. I have PLC a programme to control the valve. The existing programme is to control valve A (Y22), and I want to change to...
Replies
2
Views
144
parky
P
H
How to lock a fx3u plc ladder from reading using gx work2
Dear all, I don't know why setup of password became challenging and weird. After setting up the password and try to upload the ladder from the plc...
Replies
3
Views
172
how
H
H
Connection between pc and mitisibushi fx3u-64m plc via usb-sc09-fx cable adapter
Dear all, I have fx3u series plc with built in rs422 port and usb-sc09-fx cable. I have a a hyperterminal like application to send and receive...
Replies
8
Views
223
how
H
G
Mitsubishi - FX3U + FX3U-USB-MB + FX3U-485ADP-MB - Modbus configuration - Paramètres
Bonjour, Je n'ai pas de communication modbus RTU vis la configuration ci-dessus. J'ai essayé les deux mode ch1 et ch2 mais rien ne fonctionne...
Replies
0
Views
164
Gael Boucekkine
G
Back
Top Bottom