Micrologix & stepper drive

Caveman

Member
Caveman
Join Date
May 2002
Location
Cadiz, Kentucky
Posts
212
Anybody ever connect a SLO-SYN SS2000MD4-M
to a Micrologix 1500 bxb. The slo-SYN drive needs
5vdc inputs and the 1500 has 24vdc outputs. I'm
Planning to use a pot for a voltage divider if that would
work properly. I would like to see a sample program
if possible.
 

Similar Topics

T
Stepper Motors and Micrologix 1400 PLC's (BXB Model)
Thought I'd post this to help other's out :) Any further questions, don't hesitate to ask. Credit to Keithkyll for his advice!, Using 24v power...
Replies
0
Views
2,026
Tremaino
T
I
stepper control micrologix 1400 for dummys
Looking at possibly using a stepper motor/drive to index a conveyor on a stand along packaging type machine that will index 12 inches each time it...
Replies
5
Views
4,370
Archie
A
M
AMCI 3102 Stepper Controller + Micrologix 1200 + Anaheim Automation Stepper Driver
Hi, I've got a micrologix 1200 and I've written a stepper application following the sample application included with the AMCI 3102 stepper...
Replies
1
Views
5,092
kolyur
K
G
Micrologix 1500 and Stepper motor
First, I don't want ppl thinking this is the same as my other thread as this is for the Logic side and the other was setting it up. Can anyone...
Replies
0
Views
2,152
Gig Jr
G
R
Stepper Motor Control with MicroLogix 1200
Are there any modules available for the Micrologix 1200 that perform stepper motor control? Is there a standard protocol to use with normal...
Replies
3
Views
4,770
ndzied1
ndzied1
Back
Top Bottom