USB Port Joystick via opc server to PLC or DCS

Shaun

Member
S
Join Date
Nov 2002
Posts
14
I am currently looking at connecting joysticks via usb ports on an HMI PC and sending the joystick position data via an opc server to a PLC. I can't see why this cannot be done. We typically use kepserver, although this application we will be using DeltaV DCS.

Any ideas?
 

Similar Topics

C
Setting a tag to the USB port on PV800
I have a USB port RFID Scanner I am using for badging users into certain access levels in an HMI. I know that I could create a 'login' button that...
Replies
3
Views
611
Ckoch
C
P
Panelview Plus 7 CSV export to USB stick
I am trying to export the alarm history on a Panelview Plus 7 to a USB stick. I cannot get it to write to the USB stick. I have tried the...
Replies
10
Views
6,121
plclady
P
R
USB (C) Programming port
Anyone know if a company makes a 24VDC power supply to USB (C) charger in place of a 120V outlet for programming? I have some panels with 480V or...
2
Replies
21
Views
10,889
Rson
R
gbradley
CompactLogixUSB Port
Is there an advantage to communicating to CompactLogix with the USB port versus Ethernet? I've always used Bootp to set the IP address on a new...
Replies
9
Views
2,911
_Dock_
D
R
Pvp 6 export .csv files to usb flash drive
Hello, I have an AB PVP 6 with version 10 FactoryTalk ME firmware. I would like it to export the Audit Trail and Alarm History to a USB flash...
Replies
4
Views
2,431
Ryan_Flowers
R
Back
Top Bottom