Rcochran@ee
Member
has anyone every sent Ethernet messages over from logix 5000 to a mitsubishi Gxdeveloper Q02CPUH and if so did you have problems.
allen bradley to Mitsubishi
- Thread starter Rcochran@ee
- Start date
Hi
I have not but I have worked on both and used Ethernet on both.
I don't (not 100 %) think it will work as I had a lot of trouble getting the mitz plc to talk to some Ethernet devices due to mitz having different type of Ethernet cards , so be very carefull.
Now I know both do devie net and I have worked on both and found both to be very good but again I have not Connected them this way myself
Donnchadh
I have not but I have worked on both and used Ethernet on both.
I don't (not 100 %) think it will work as I had a lot of trouble getting the mitz plc to talk to some Ethernet devices due to mitz having different type of Ethernet cards , so be very carefull.
Now I know both do devie net and I have worked on both and found both to be very good but again I have not Connected them this way myself
Donnchadh
Similar Topics
- Poll
Can anyone with experience on BOTH the Mitsuibishi iQ platform and the Allen Bradley ControlLogix/CompactLogix platform provide opinions why one...
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
Dear community,
I am trying to find a tool for Allen-Bradley PLCs similar to SiVArch for Siemens PLCs to automatically generate faceplates and...
Hi everyone, new to forum. Since very long time i having issue with 1734-AENT module, after some period of time its keep stuck in error (simmilar...
Hello, I am new here. I am trying to find good places to sell some surplus items that I have that isnt through ebay. Does anyone have any sources...
