TSX37 micro - Unitelway - WIncc Flex OP277

Hi,

I want to connect a TSX micro PLC (modicon) to a OP277 Siemens Panel.
I've done the research, it is written in de manuals that this is possible.

But what about the cable. I have several convertercables, but that's for making a connection between RS232 and Modicon PLC.

But I have to uwe the Profibus RS485 port on de OP277 panel... so these converters are not applicable.

Are there cables for making an RS485 connection tot the TSX37 micro PLC ?

Thanks,
Combo

What kind of port does the TSX PLC have ?

If RS232, then there is this RS422/RS232 converter that you install on the port on the Siemens panel: 6AV66718XE000AX0
The Dip switches on the rear of the Siemens panel must be set to RS422/RS485.

Rs485

Rs485.

jespermp said:

what kind of port does the tsx plc have ?

If rs232, then there is this rs422/rs232 converter that you install on the port on the siemens panel: 6av66718xe000ax0
the dip switches on the rear of the siemens panel must be set to rs422/rs485.

Click to expand...

Okay

I've found a post from 2006 about this.
I placed my question there:

http://www.plctalk.net/qanda/showthread.php?p=573100#post573100

Regards,
Gerry