Nathan Hendrix Member N Join Date May 2004 Posts 23 May 7, 2004 #1 Please help with resetting "alarm" fault on this controller. Also information on correct cable and software for communication.
Please help with resetting "alarm" fault on this controller. Also information on correct cable and software for communication.
ArikBY Member Join Date Oct 2003 Location Oranit Israel Posts 1,434 May 7, 2004 #2 You can find what you need to connect to your PLC here: http://www.plctalk.net/qanda/showthread.php?s=&threadid=7849&highlight=Syswin When you will connect to erase the fault it esay. Came back we will help. All the best
You can find what you need to connect to your PLC here: http://www.plctalk.net/qanda/showthread.php?s=&threadid=7849&highlight=Syswin When you will connect to erase the fault it esay. Came back we will help. All the best
Nathan Hendrix Member OP N Join Date May 2004 Posts 23 May 7, 2004 #3 Thank you for help Airkby!!! It looks like the battery is damaged and of course my program is lost. I found what I needed from your link. Thanks again. Last edited: May 7, 2004
Thank you for help Airkby!!! It looks like the battery is damaged and of course my program is lost. I found what I needed from your link. Thanks again.