Wago and Monitouch

make a marker in the hmi and read it via comms into the PLC.
i would have the PLC put its visualisation on the screen, yhis way you only have to program the PLC.
 

Similar Topics

U
Setting up WAGO PFC 200 750-8216 as a Profibus Slave
Hello, I am in possession of a WAGO PFC 200 750-8216 which I was successfully able to set up as a Modbus RTU Master to a slave device using...
Replies
0
Views
78
udit_91
U
W
Wago Remote IO rack with a 750-652 serial card configured for Modbus on a AB L72 PLC
I have a project to setup base programs across multiple PLC platforms that can be used for Modbus communications to various sensors that have...
Replies
0
Views
120
Whatsup
W
S
Wago 750-862 Auto-run problem
Hello, I m having a problem with wago 750-862 plc. The plc won't start automatically in run mode after a power reboot. I've also tried the...
Replies
4
Views
347
sumit.sharma
S
E
Wago 750-8100
Hello everyone, I am trying to setup a Wago 750-8100 PLC to send a text message out via ethernet port, if I get a Digital input that is true. I...
Replies
0
Views
342
ESPIjessc
E
P
Wago remote io
How do you set up a message block for a REMOTE IO unit? (using ethernet IP)?
Replies
1
Views
594
glennz
G
Back
Top Bottom