1734-485ASC module configuration on EtherNet

narenperth

Member
N
Join Date
Jun 2011
Location
Perth
Posts
4
Hi guys,

Have anyone configured 1734-485ASC Module connected to ControlLogix PLC L63 via 1734-AENT Module.
I have a RFID Reader which is wish to connect to PLC using RS485 output from the reader. 🤞🏻
Cheers!!!
 

Similar Topics

P
1734-485ASC module firware upgrade
Hello, Is it possible to upgrade firmware version of 1734-485ASC module from 3.1 to 4.1? If yes - How? Regards, Punit
Replies
0
Views
1,238
punit_bh
P
J
1734-485ASC module usability !!
Hey all, Warm wishes to all of the season :) Ok, so I have a few(25) temperature controllers which have RS485 ports for communication. The...
Replies
7
Views
4,260
jdbrandt
J
N
1734-485ASC module configuration on EtherNet
Hi guys, Have anyone configured 1734-485ASC Module connected to ControlLogix PLC L63 via 1734-AENT Module. I have a RFID Reader which is wish to...
Replies
3
Views
2,429
narenperth
N
N
1734-485asc Ethernet Comm
I have only been at this 3 months and I recieved a curveball. My cabinet is finished and shipped but I was just informed that feedback which was...
Replies
4
Views
3,243
Ken Roach
Ken Roach
T
1734-IT2I Power Distribution Requirements
Looking at installing point io, with a 1734-AENTR communications adapter and ten 1734-IT2L modules. In IAB it installs a 1734-EP24DC after every...
Replies
1
Views
15
Mike Nash
M
Back
Top Bottom