ALLEN BRADLEY PANELVIEW300 default password

bayeibrahima · Jan 30, 2014

Hello to all
I've received a new panelview300 IHM.I was trying to enter the menu Config; but it prompts me to enter a password.
Please can someone tell me if there's a default password.
Hope to read you soon
Best regards

MATT116 · Jan 30, 2014

password

bayeibrahima · Jan 31, 2014

Hello sir
the keypad is not alphanumeric;it's only numeric
then how can I do to write "password"
Best regards.

Ken Roach · Jan 31, 2014

There is no default password for the PanelView Standard terminals. The password is always part of the user program.

You can access the Configuration Menu by pressing a combination of buttons on the terminal.

This is described in the PanelView Standard User Manual, Publication 2711-UM014, starting on Page 66.

An excerpt:

Follow these steps to reset the PV300, PV300 Micro, PV550 (keypad,
keypad and touch) or the PV600 (keypad, keypad and touch)
terminals.

• Simultaneously press the Left arrow , Right arrow , and Enter ↵ keys. The terminal performs its powerup sequence.

The sequence in which keys are pressed (while running an application), determines what appears after the reset.

• If you press the Left and Right arrow keys before the Enter ↵ key, the Configuration Mode menu appears.

• If you press the Enter ↵ key before the arrow keys, the terminal
runs the loaded application.

TIP: If the Left or Right arrow keys on the PanelView 300 Micro are assigned as function keys, you must use the GoTo Configuration Screen button.

bayeibrahima · Feb 1, 2014

Hello Ken; thanks for your help
I happened to enter the Config menu.
Thank you

ALLEN BRADLEY PANELVIEW300 default password

bayeibrahima

Member

MATT116

Member

bayeibrahima

Member

Ken Roach

Lifetime Supporting Member + Moderator

bayeibrahima

Member

Similar Topics