cpmiller
Member
I was thinking this would be a good place to get some opinions on Safety PLCs. I have been given the task of implementing a safety system around 2 machines and the conveyors that feed them product as well as conveyors that finish the product after it is processed. The feeding conveyors need to operate independently (ie...product setup) as well as under control of 1 of the machines with the safety systems seperated accordingly. The conveyors and equipment that finishes the product can be controlled by either machine with their safety systems interlocked with the feeding machine only. I am thinking to prevent a Estop cicuit nightmare a Safety PLC is the best method to accomplish this task. Any advice on ease of use, expandability, and reliability would be greatly appreciated.
Thank You,
Chad
Thank You,
Chad