New to SCADA:)

theripley

Member
Join Date
Jul 2008
Location
laguna
Posts
545
Hi.

Is anybody familiar with Citect? I think it is a schneider SCADA software. I'm just wondering if I can connect to it a Mitsubishi PLC. The thing is, we would propose a refrigerant leak monitoring system using a Mitsubishi PLC, since we're not familiar with schneider. I am a newbie to SCADA so I do not really know.

Please help.
 
Citect was an independent SCADA company before it was brought by Schneider about three years ago. It has drivers for most plcs included as part of the standard package. So yes I am sure it would have a driver for Mitsubishi. I think you can download Citect from the Schneider website, it has a demo mode that runs for 30 minutes
 

Similar Topics

So I'm pretty new around here but I come looking for advice or suggestions to research. Im the plant electrician/SCADA guy for a warer department...
Replies
2
Views
51
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
50
Has anyone ever seen where you have a tag reading from the plc in scada. In this instance it's just a PEC, I set it up on one scada terminal and...
Replies
0
Views
90
Hi guys, I have experience with PLC to Excel etc...just starting on using intouch scada screens. I have an Excel sheet that uses mainly...
Replies
1
Views
139
Hello guys, I would need some help. I have installed the aveva plant scada and want to run a project. From the configurator, all are fine, as I...
Replies
0
Views
102
Back
Top Bottom