Beckhoff Analog input card selection

[email protected]

Member
B
Join Date
Nov 2011
Location
Ireland
Posts
182
i have a 0....20mA that represent -100.....+100watts

what card can i use to measure this signal

i have a KL3012. however i noticed that this is a different input and also that is has no power contacts

can this card be used
 

Similar Topics

R
Input to Beckhoff Analog card
How would I connect a 5K potentiometer to a beckhoff analog input card EL 3061 (http://www.beckhoff.ca/english.asp?ethercat/el4031.htm) and 24VDC...
Replies
5
Views
4,866
shooter
S
A
RTD vs Current analog input devices . (beckhoff to be exact )
hi . we are using beckhoff decentralised I/O module on profibus , which has its different analog cards for RTD , current and Voltage input. i need...
Replies
12
Views
5,897
shooter
S
T
Control Valve through Analog Input/Output - Beckhoff PLC
Hello, I would like to control the valve through the beckhoff PLC. The valve operating range is from 0-10 volts and i have terminal EK 1100...
Replies
3
Views
6,022
RocketTester
R
H
Beckhoff analog input
Hi. I try to understand how to read an analog input (4-20mA). Using TwinCAT. I found this example on how to scale the input into engineering...
Replies
0
Views
2,984
hapetter
H
P
Beckhoff Analog output terminal configuration
Hi, I am facing a problem. I have configured the analog output terminal EL4004 as (output_1 AT%QW2: INT) but I did not get the output which I...
Replies
6
Views
3,081
RocketTester
R
Back
Top Bottom