r_mclinn
Member
Hello all,
I have a question regarding a stepper motor. I have a Danaher 6410 Stepper controller connected to a Kollmorgen E31NCFT-LNN-NS-01 1.8 degree stepper motor. The Danaher drive is designed for TTL inputs. I have very limited experience with stepper motors and zero experience with TTL controls. I have looked at the offerings from A-B and found a TTL output module in the 1769 family. My question is can this module be configured for different frequencies to control the speed of the stepper motor, and will it work with a 1769-L23E-QB1B controller?
Thank you for your help
Robert
I have a question regarding a stepper motor. I have a Danaher 6410 Stepper controller connected to a Kollmorgen E31NCFT-LNN-NS-01 1.8 degree stepper motor. The Danaher drive is designed for TTL inputs. I have very limited experience with stepper motors and zero experience with TTL controls. I have looked at the offerings from A-B and found a TTL output module in the 1769 family. My question is can this module be configured for different frequencies to control the speed of the stepper motor, and will it work with a 1769-L23E-QB1B controller?
Thank you for your help
Robert
