Expansion Slot

inJGS

Member
I
Join Date
Feb 2014
Location
Madrid
Posts
11
Hello!

I'm trying to connect a MP277 with CPU-316-2DP across ethernet card CP-343-1.

I'm not sure what is the correct configuration for HMI connection. I'm using Rack=0, ExpansionSlot=3, but It doesn´t work (the IP, mask... are correctly set).

Can anyone help me? Thanks!
 

Similar Topics

D
I need help figuring out the addressing of an expansion slot DL06 PLC
I have a DL06 PLC from Automation direct and I am trying to learn how to use the expansions slots in my program. Coming off of allen Bradley...
2
Replies
20
Views
6,218
davidgeorge212
D
J
Not adding configured expansion modules to Siemens S7-1200 without a stop?
Hi First post here! I admit I am not too used to handle interrupt OBs in Siemens. I have a customer who has been buying a standardized solution...
Replies
4
Views
243
Johan_Swe
J
A
Analog expansion module for ML 1500
Good morning Guys, PLC: micrologic 1500 LRP 24bwa c series soft: Rslogix 500 We are required to consider the weight of the product in such a way...
Replies
7
Views
1,364
widelto
widelto
P
Schneider Electric PLC M221 - Expansion module for serial port (RS485)
I am using a M221 PLC (TM221CE24R) which provides me 1 Rs485 port, which I am already using to communicate with a sensor (Rs485/Modbus). My...
Replies
1
Views
736
Lare
L
R
Allen Bradley Compact I/O Expansion Cable damaged
We have an AB PLC that has a faulty expansion cable between Bank 1 and Bank 2. Part # 1769-CRR3. I found a small burn mark on the board. Being...
Replies
1
Views
759
parky
P
Back
Top Bottom