HMI Software

Eric01234 · Feb 21, 2014

Hi all.

I need some training on the Mitsubishi E150 and E700 HMI’s. I have got a suitable plc + plc software but have not got the software to program the HMI.

Does anybody know the correct product + does anybody know a reasonable cheapish vendor. 2nd hand is fine.

Many thanks.

Goody · Feb 21, 2014

The software is E Designer and it's not very expensive.

http://uk.farnell.com/jsp/displayPr...atch|p|plid|&gclid=CMGj44_R3bwCFQ_HtAodXz8AwA

There may be cheaper vendors but £126 isn't too bad.

Eric01234 · Feb 22, 2014

Thanks Goody.

According to the link that software covers:
Text Operator Terminals E50, E100, E150 and E200.

What do I need to program the E700?

Goody · Feb 22, 2014

I agree, the description is misleading - so I can only say, I'm sure it programs them all.

I have E Designer and E designer 7, The latter is for programming the E1000 and up (but it also programs all the ones you want to.

A company near you called BPX are mitsi agents - they will have it. Ask for E designer 7 then you are covered for every model.

Eric01234 · Feb 22, 2014

Thanks again.

I know them well. I had a quick look on their website but couldn't find it. Ill give a ring on Monday.

EssentialAutomation · Mar 3, 2014

Hi,

We have the software available here -
New - http://www.essentialautomation.com/ea1067.html
Second Hand - http://www.essentialautomation.com/ea0373.html

Feel free to drop me an email should you require any technical assistance.

HMI Software

Eric01234

Member

Goody

Member

Eric01234

Member

Goody

Member

Eric01234

Member

EssentialAutomation

Member

Similar Topics