mjoubert
Member
Success at last using Modbus RTU Universal Master.
See Note for Device Settings.
See Note for Device Settings.
Redlion G3 to Lenze ACTech SMV Drive
- Thread starter mjoubert
- Start date
mjoubert
Member
OP
If I could find a Lookup Table for the fault code values Eg. 8738 = Network Fault, I'd be Extatic ...
Similar Topics
Help Required ....
I have configured the CANOpen expansion option card on the G310 to as SDO Master at 500 KBaud. There are 3 Devices. The 1st...
Hey guys, hoping someone here could give me a little advice. I'm working with a CR1000-04000 in Crimson 3.1 and I was interested in adding the...
Hi,
I have a complex database in Crimson 3.0 and in one of the display pages I am trying to get a tag to show the sum of several other tags. The...
Hi All,
Hoping to get some insight into best way to terminate shielded twisted pair + common into a RJ45 required for RedLion RS485...
I have 8 of these systems all running the same code. Just this one seem to gain about 30 seconds in time everyday. So in 48hrs time will be...