Easybuilder automatic switch screens?

Hey folks!

For a client of mine i am planning to make a demo screen to show them what is possible with my system using a Weintek MTV.

Can anyone help me how i can make things so that it will automatically flip trough the available screens i have made? few seconds on one screen and then on to the following.

Thanks!
Marc.

you could use an indirect window object and use the System word LW9017 Local Second. This Would open the screen number that is equal to the local second. So depending on the number of screens you have would determine the amount of time it could be displayed. If you want to display a screen for 5 seconds then you would have to have 5 copies of the screen in succesion. You could index the tag value by setting index Register 0 to 100 and that would allow to use all 60 seconds of the minute. That would require you put your screens on pages 100-159. Just add a numeric input to write 100 to LW9200. (index register 0)

Thanks Cwal61,

This will no doubt keep me busy for a few hours, i'll report back how i'm faring on this one.

Best regards,
Marc.

under Edit window process there is a window copy command. choose your window to copy and paste for a range. this will make a copy of window to all window selected in the range. Be sure to make you indirect window the size of windows you want to display.

good luck with your project.