siemens plc and novus device modbus

pratik8950

Member
P
Join Date
Mar 2013
Location
gujarat
Posts
7
hi i am using s7200 plc and novus controller DIN Rail 2A for my project

i am communicating novus device through modbus from s7226.

I am not able to get the results eventhough the communication is correct.

i have attached my code with this thread.

novus.jpg
 

Similar Topics

A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
90
mk42
M
Rsflipflop256
Setting up a modbus network on a DL262 Directlogic PLC with Siemens LMV 3 Burner controllers as slaves, eight of them, with OCI 412.10 Interface
Good morning fellow sea captains and wizards, I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
2
Replies
27
Views
630
Rsflipflop256
Rsflipflop256
D
Siemens PLC download with IO device
Hey guys, I have to take an upload of a program on an S71200 PLC to change a hardware config option and then redownload the program with this...
Replies
3
Views
111
JesperMP
JesperMP
R
Siemens PLC and python communication over profinet
Hello Guys, I want to establish profinet communication between siemens plc and my system using python programming. Which python lib can i use to...
Replies
12
Views
360
Mandel314159
M
P
When will PLC reinitialize values of a downloaded DB? Siemens step7
When you download a DB, the values get overwritten by what is in the "actual" column in offline DB. Does this happen at the start of the PLC...
Replies
6
Views
142
JesperMP
JesperMP
Back
Top Bottom