Siemens IPC477C

KEN_KACEL

Member
Join Date
Nov 2002
Location
NORTH COUNTRY
Posts
162
I have IPC477C 6Av7884-5ag30-6ba0 bSiemens 19" Touch HMI

The Windows Explore IE5 is not working. I have tried to recover the windows exporer with no luck and I tried to reinstall
the windows again dead end. I get errors on the screen and all the errors on the WWW have solutions that don't work. I think because the hard drive is in compressed mode. I do not have the install disks and Siemens is qouting $500 for the install disks for the XT embedded. Does anyone have an install disk they can copy or want to part with. $$$ I am flat down and would like to find a cheaper alternative
 

Similar Topics

Good morning fellow sea captains and wizards, I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
Replies
20
Views
204
Hi everyone, I am an omron plc tec , lately I came across a siemens s7 200 cn plc . Can someone help me regarding the software required and...
Replies
26
Views
461
This is the first time I am working with Simatic Manager Step7 as I started my siemens journey with TIA which is pretty easy and do a lot of stuff...
Replies
3
Views
117
Hi, I have PLC S7-1200 and switch XC-208 and Iam trying to implement this SNMP library: SIOS I am not sure, what I am doing wrong, but there is...
Replies
3
Views
122
Hi all, i am the new controls guy at the plant and i have inherited a pc from the previous controls guy with Siemens tia portal version 16 and 17...
Replies
20
Views
707
Back
Top Bottom