Twido to weintek

Sparkle

Member
Join Date
Mar 2014
Location
Melbourne
Posts
1
I have a twido twdlcde40drf connected to a Weintek HMI via Ethernet , I can get %mw from the Twido to read and write on the hmi but cannot get the hmi to display bit changes of state from the Plc . Can any one help. I am using Modbus top/ip settings.
 

Similar Topics

Hi guys!! I'm New here and new with this type of plcs i have TWDLMDA40DTK and i need to get a copy of the program and i don't have an original...
Replies
6
Views
684
Dear friend, how to read the input register (3xxxxx) of device from twido plc. i have tried the comm macro but it always read the holding register...
Replies
3
Views
1,567
Good, how do I control through an Analog output of a valve, that is, open the valve from 10% to 10% until it reaches 100%, and then close it...
Replies
4
Views
2,237
Hi! I bought a secondhand Twido base unit to help me learn programming and also faultfind expansion modules (one of my customers machines uses...
Replies
4
Views
1,684
We're a second hand machinery merchant. We've just had a machine arrive that has a Schneider Twido TWDLCAA24DRF PLC and a Magelis XBT-R411 HMI...
Replies
4
Views
2,398
Back
Top Bottom