PID control program in CP1E-NA series OMRON PLC

tbalajihsr

Member
T
Join Date
Mar 2014
Location
Melmaruvathur
Posts
1
Hi!

I have CP1E-NA series OMRON PLC which is in-built 2 analog inputs and 1 analog output. Verified the inputs and outputs are working well in 0-10V mode and 4-20mA mode.

I wanted to do PID control program. I had tried with sample programs given in the various OMRON Manual. All other programs are working except PID control algorithm.

If anybody send the complete verified program, then it will be useful to me.

Thanks in advance.

BALAJI,
[email protected]
 

Similar Topics

K
control program for pneumatic valve with PID error
I don,t know how to design a ladder to control operation of pneumatic valve with PID input?
Replies
6
Views
2,953
komal.sukre
K
T
The best way to control 48 PID temperature control
I have S7 1512C controler for controlling 48 PID temperature loop, the output is PWM. Please I need the best, most efficient way to write the...
Replies
13
Views
591
tarekrslan
T
J
PID Control of machine speed forward and reverse
Hi all, I'm having trouble solving a problem I've been working on for several months, and thought you might like a stab at it. The machine runs...
2
Replies
22
Views
926
Peter Nachtwey
Peter Nachtwey
S
LEVEL CONTROL BY PID
How can I connect PID Output to a valve. In ladder logic program is there any logic do I want to add between valve and PID? PV=SP What will be the...
Replies
7
Views
409
Bit_Bucket_07
Bit_Bucket_07
M
Suggestions for PID control
I am setting up control for Hypochlorite dosing. The easy part is the dosing calculation for flow pacing but I would also like to setup trimming...
Replies
8
Views
942
mhump711
M
Back
Top Bottom