Fiki
Member
Helou,
I need your help on this one
I have a Delta PLC (SA2 series) and I would like to connect an OPTICON NVL 1001 series directly to plc.
I have to use COM 1 port on my PLC (RS 232), witch has a socket for 8P Mini Din RS232 (male).
http://www.amazon.com/RS232-Download-Cable-White-DVP-EH/dp/B007PPHZZG
The OPTICON supports RS 232 communication.
Here are my question:
Can this (using the right programming) be done directly, or do i have to use a thrid party.(PC)
I don't have any cables, so u have to make one. have a male connector 8 PIN MINI DIP and a male connector DB9. (probably for connection to scanner, have not seen the scanner yet )
I have a problem wiriing the connectors. I am afraid to fry something(inproper GND connection
My connection would be:
OPTICON(DB9P male) PLC (8 pin mini DIN male)
3TDX-------------------> 5TDX
2RXD-------------------> 4RXD
5GND------------------> 8 GND
Here is the UserManual for opticon :http://old.opticon.com/manuals.aspx...&productCategoryMasterObjectId=0000&showall=0
Page U8 for RS232
and PLC delta (in general)
http://www.controlsolution.hu/docu/termekek/39/TP connection Manual English.pdf
page 7
And what is the difference between DB9S and DB9P?
Thank you in advance
I need your help on this one
I have a Delta PLC (SA2 series) and I would like to connect an OPTICON NVL 1001 series directly to plc.
I have to use COM 1 port on my PLC (RS 232), witch has a socket for 8P Mini Din RS232 (male).
http://www.amazon.com/RS232-Download-Cable-White-DVP-EH/dp/B007PPHZZG
The OPTICON supports RS 232 communication.
Here are my question:
Can this (using the right programming) be done directly, or do i have to use a thrid party.(PC)
I don't have any cables, so u have to make one. have a male connector 8 PIN MINI DIP and a male connector DB9. (probably for connection to scanner, have not seen the scanner yet )
I have a problem wiriing the connectors. I am afraid to fry something(inproper GND connection
My connection would be:
OPTICON(DB9P male) PLC (8 pin mini DIN male)
3TDX-------------------> 5TDX
2RXD-------------------> 4RXD
5GND------------------> 8 GND
Here is the UserManual for opticon :http://old.opticon.com/manuals.aspx...&productCategoryMasterObjectId=0000&showall=0
Page U8 for RS232
and PLC delta (in general)
http://www.controlsolution.hu/docu/termekek/39/TP connection Manual English.pdf
page 7
And what is the difference between DB9S and DB9P?
Thank you in advance