ELAU AG Servo Motor

isteak007

Member
Join Date
May 2009
Location
NewYork
Posts
216
Hello Everyone,

I have a ELAU servo motor SM 100-50-030-P0-45-R1-B0 installed in my machine. Now the motor is defective.

I am unable to find the same motor. I searched almost everywhere.
the closest i am able to get is the SM-100/50/030/P0/45/S1/B0.

Now there is some difference mine one use Resolver and available one used Sin-Cos Single Turn Encoder.

http://static.schneider-electric.us/docs/Motor%20Control/Motion%20Controllers/Data%20Sheet_%20PacDrive%20SM%20Servo%20Motor.pdf

Now is there any way to use this motor with my machine?

If anybody has any experience with this motor?


Thanks
 

Similar Topics

Hi All, the problem occured when we powered on the machine only we notice that the motor is very hot before any order of rotation , after we...
Replies
0
Views
940
In my machine i have a ELAU PMC-2 Servo Positioning Controller Part no: PMC-2/11/08/000/00/03/00/01/00 But now the Servo Drive is defective. i am...
Replies
1
Views
3,153
hi everybody. i try conect whit max-4 and PacDrive Diagnostics 2.1 but i can´t do. i follow ok steps as next link video but in second 0.41 is my...
Replies
1
Views
1,632
Hello, I'm looking to setup a test rig in the workshop for testing the likes of the following units; Elau MC-4 Servo Drives & Pac Drives...
Replies
2
Views
1,751
hello everyone I need Firmware version V00_22_05 for my MC-4 kan anybody help me, i can't found this file Thanks ans regards
Replies
1
Views
5,075
Back
Top Bottom