Omron DRM21 error code

SOURCE

Member
Join Date
Nov 2013
Location
Ayutthaya
Posts
19
Dear : every one
I have problem of the DRM21 error E2...!! that i connect V680
RFID 3 module.After connect resistance 130 Ohm at the module No.3
then error code d5. I don't know.What happen for this case.and how to fix it. If possible please explain me...please...

xxx.jpg
 
You need to download the W380 manual.
This manual contains the Troubleshooting information you are looking for.

E2 is a timeout error.
d5 is a non-existent slave error.

Have you set up the scan list for the DRM21?

Hope this helps.
 
Thank you so much for your reply. I already set devicenet now ok.
But i have 2 question for this product...?
1.)Why i cannot use the function block to read/write( If i use
1 master/5 module RFID V680-HAM42)
2.)What is a commander for read/write data to tag
For more knowledge please help to explain me...
đź“š
 

Similar Topics

Hello, Ive replaced a devicenet node with a Ethernet node. how to I take out that node form the configuration. regards
Replies
2
Views
1,511
CJ2M-CPU33 with CJ1W-DRM21 device net to stanley nutrunners I am having trouble when starting up the machine (Initial Power to everything) the...
Replies
3
Views
3,719
Hey All, Looking for some direction on how to map a SMC EX250-SDN1 SI unit to an Omron CJ1W-DRM21 device net scanner. The manual says that it...
Replies
1
Views
3,070
IN MY COMPANY WE ARE USING OMRON CS1W-DRM21V1 MODULE AS A MASTER UNIT. THROUGH DEVICENET WE CONNECTED DRT2-ID16 & DRT2-OD16 INPUT & OUTPUT...
Replies
2
Views
1,997
:banghead: Anybody know of a link to the CS1W-DRM21 manual? Ive been looking on the omron site for the last half hour, and im about to throw...
Replies
3
Views
6,129
Back
Top Bottom