Cable for the PLC

Hello Guys I'm using S7200 Siemens PLC in a conveyor system, I also made SCADA like system where I use PC as a panel. When 1 of the conveyor motor trip, tripped motor will show/blink in the PC screen. all are smooth and running, the problem is I use PC/PPI cable and I wanted to change the cable because I only have 1 PC/PPI cable and I'm going to use it in another programming purposes. Is there any method or can I make a cable that will communicate the (" PC and PLC " )?. It will take time if I'm going to order PC/PPI cable.

Please help

Any data-driven RS232/RS485 cable will do for S7-200 (only RX, TX and GND are used on the RS232 side). If you google this you'll even find some schematics to roll your own.

Kind regards,

Thank you for the quick reply Sir..