Phoenix Contact SCADA

Joel201

Member
Joel201
Join Date
Nov 2013
Location
Calamba City
Posts
151
Good Day,

Anyone out there can clarify me some things about PC worx and Visu+.
I will gonna use a ILC 151 ETH which has built in MODBUS TCP/IP if i were gonna use tags in the PC worx to the Visu+ SCADA will i use the MODBUS TCP/IP to use the tags of PC worx if so how can i determine the start address of a certain tags in my PC worx thank you very much for your help.

Regards,
Joel
 

Similar Topics

A
Phoenix Contact Interbus RFC 430 2730190
I am stuck on fail ctrl error 1013 cannot get IP nor can do firmware update need help pls urgent
Replies
0
Views
158
abdullah333
A
N
Phoenix Contact Ethernet Switch Password
Hi, I'm working with a Phoenix Contact FL NAT 2304-2GC-2SFP Ethernet switch, I already set the IP address and it has been working fine. I can...
Replies
2
Views
1,213
nievesdelimon
N
T
AB Micro800 VS Phoenix Contact AXC-F-2152
Hi all, Historically i have used AB compactlogix exclusively working within the Logix/Studio5000 environment. I have decided to step out of my...
Replies
10
Views
1,867
thehoneybadger
T
K
Phoenix Contact TriSafe Password Recovery
Hi all, first time poster and working on an existing PC TriSafe PLC for the first time for a project. I am wondering if anyone would know if...
Replies
2
Views
1,094
k.lara
K
theColonel26
(Rant)(CAD Models): Phoenix Contact Took the Time to say "FU!!" to their customers
(Rant)(CAD Models): Phoenix Contact Took the Time to say "FU!!" to their customers So obviously they have real CAD models of their parts because...
Replies
0
Views
1,754
theColonel26
theColonel26
Back
Top Bottom