I wanted to configure siemeas Q through my laptop. I have installed simeas q PAR software and bought the RS485/RS232 converter ( 7xv5700) with external 5v supply. Now when i try to connect it ,it does not work, giving timeout everytime.Is there any special procedure ?
simeas Q communication with PC ??
- Thread starter panthripu
- Start date
Similar Topics
Hi
I am trying to establish communication between SIMEAS P power meter and siemens S7 PLC but it seems that there is something wrong.
In hardware...
Hi everyone.I hope someone can help me here.
So, i have the problem to read out the values on my opc scout for my configuration described above.I...
Hello Everyone,
I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
i have two plc
1. s7-1212dc/dc/dc ip; 192.168.0.1
2. s7-1500 1513-1pn ip; 192.168.3.2
i need to get data from plc1 to plc2. any idea how to do...
I have created a project in TIA Portal v16 Upd6 with S7-1200 (6ES7214-1AG40-0XB0) and WinCC Unified (PC station). The communication between the...