S7-1200 modbus ascii

Ramsri

Member
R
Join Date
Apr 2014
Location
coimbatore
Posts
40
Can anyone share me how to take ASCII values from other devices via modbus in S7-1200?
icon18.gif
 
You will have to add a communication module (CM) to your system.
There are blocks in the communication Library for Modbus master or slave.
Check the Siemens support page for examples.
 

Similar Topics

K
Siemens S7-1200 with Omron M1 - Modbus RTU
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
248
KalvMavin
K
G
yokogawa controller with modbus tcp/ip communication with s7 1200 plc
can i send and recieve data using my yokogawa UT35A controller with my siemens s7 1200 plc using profinet communication without using gsd file
Replies
1
Views
382
Puddle
P
N
S7-1200 - CarloGavazzi EM340 Modbus Comms
Hello all. I am trying to read out the values from a Carlo Gavazzi EM340 energy analyzer via Modbus communication. The S7-1200 PLC has the CB1241...
2
Replies
29
Views
3,789
Puddle
P
B
Pinout Modbus TCP onto S7-1200 through profinet port
Hello All I have a modbus tcp device(Julabo magio) with an DB9 pin assignment. Pin3=B and Pin8=A. I would like to connect it on the secondary...
Replies
4
Views
1,612
the_msp
the_msp
J
S7-1200 Modbus RTU Reads
Hi all, reading out parameters from a Weg CFW500 VFD using a Siemens S7-1214 CPU over Modbus RTU (CB1241). Using the PLC's built-in Modbus...
Replies
4
Views
1,696
Lare
L
Back
Top Bottom