SLC 150 with PIC?
- Thread starter oregonsam
- Start date
Contr_Conn
Member
No it will not work:
PIC is 2 wire DH485 with an additional control circuit and 24V power
PCC is 4 wire RS422 with 12V power.
And connectors are different.
PIC is 2 wire DH485 with an additional control circuit and 24V power
PCC is 4 wire RS422 with 12V power.
And connectors are different.
Click on the link below for some older threads to find a possible substitute for the 1745 PCC. Search this site for slc100.
SLC100/150 interface threads
SLC100/150 interface threads
Similar Topics
How can I get a schematic for it? I am unable to communicate to it using PCIS with a 486 PC and suspect the SLC150 to be faulty (found in a junk...
HELP! I've been searching & searching for the software to run my SLC150 PLC for DOS 6.22 and for some reason, every link I have found for it -...
Hi,
I have an old SLC 150 processor that is throwing up a CPU Fault light. I have an EEprom program chip for it, but I can't get it to load up...
We have 3 SLC-150s that we are using, we would like to create a print for them and diagram the program so when we get approval we can replace them...
Hello,
I am completely new to PLC's (and forums) and have been tasked to repair/upgrade a conveyor system at my college. It currently has an Allen...
