replacement S5 Cards

heidarpour

Member
Join Date
Jan 2014
Location
WV - West Virginia
Posts
2
Hello
I used some S5 card that need replacement with new in S5.I divid them two groups ,Exsist cards And in our store:

Digita Input cards

EXist card= 6ES5 420-4UA11 and 6ES5 420-4UA12

Want to Replace with(In Store):6ES5 420-4UA13 And 6ES5 420-4UA14

Digita Output cards

EXist card=6ES5 441-4UA11 and 6ES5 441-4UA12

Want to Replace with(In Store):6ES5 441-4UA13 and 6ES5 441-4UA14

Analog Input cards

EXist card= 6ES5 465-4UA11 and 6ES5 465-4UA12and 6ES5 463-4UA12

Want to Replace with(In Store)=6ES5 465-4UA13

Analog Output cards

EXist card=6ES5 470-4UC11 and 6ES5 470-4UC12

Want to Replace with(In Store):6ES5 470-4UC13

Please help me and send me data sheet.

Thanks
 
e
Hello
I used some S5 card that need replacement with new in S5.I divid them two groups ,Exsist cards And in our store:

Digita Input cards

EXist card= 6ES5 420-4UA11 and 6ES5 420-4UA12

Want to Replace with(In Store):6ES5 420-4UA13 And 6ES5 420-4UA14

Digita Output cards

EXist card=6ES5 441-4UA11 and 6ES5 441-4UA12

Want to Replace with(In Store):6ES5 441-4UA13 and 6ES5 441-4UA14

Analog Input cards

EXist card= 6ES5 465-4UA11 and 6ES5 465-4UA12and 6ES5 463-4UA12

Want to Replace with(In Store)=6ES5 465-4UA13

Analog Output cards

EXist card=6ES5 470-4UC11 and 6ES5 470-4UC12

Want to Replace with(In Store):6ES5 470-4UC13

Please help me and send me data sheet.

Thanks

Hi!

I wouldn't hesitate to shift the 420, 441 and 470.
The 465 is also fine, but note the resistance bricks on the side of the card. A wrong one here could let the smoke go.
The 463 needs a closer look.

Here's the manual:
https://a248.e.akamai.net/cache.aut...U2ODQ5AAAA_19395786_HB/U-Peripherie_e_OCR.pdf

Kalle
 

Similar Topics

Hi , I am trying to replace an old inverter with a new one and its giving me issues . Once the new one was installed , the S7-300 PLC started...
Replies
3
Views
99
Hi Everyone, I replaced encoder 842D-60131331BXA with a new same part number. Dip switches and Preset Push button are considered. When I tested...
Replies
4
Views
202
Hello, I am kinda new to automation, I had an issue with 1743-EPAC which supply's 13 IO , when we inspected it there was a short circuit...
Replies
2
Views
130
A project recently went through to replace an old computer that was running Wonderware with a new computer. After a bit of work I was able to get...
Replies
7
Views
403
Good morning all, I'm integerating a device with a Rockwell PLC with V34 Studio 5000. The device reports error codes using a single integer to...
Replies
19
Views
1,222
Back
Top Bottom