Configuring a siemens 6es7138-4cb11-0ab0 module

rootboy

Lifetime Supporting Member
rootboy
Join Date
Jan 2004
Location
Tennessee
Posts
1,375
Hi Guys,

We had a siemens 6es7138-4cb11-0ab0 "Power Monitor" module either fail, and/or lose its configuration today. According to the manual, it comes setup out of the box as a 24 volt device, and if you want to use it to monitor 110AC, you have to configure it to do so.

Other than Step7 how do you configure one?


Thanks!
 

Similar Topics

O
Proficy Machine Edition Configuring Siemens Analog I/O via Profinet
I am working with an Emerson CPL410 PLC that is connected to a Siemens AI 8xU/I/RTD/TC ST (6ES7531-7K00-0AB0) via Profinet (and a Siemens Scanner...
Replies
2
Views
1,535
Ozpeter
O
T
Help needed in configuring and testing Analogue outputs of Siemens Sicam P50 meter
Hi all, Now I am working with Sicam P50 multi function meters. It have 2 sets of Analogue outputs. I want to know how we can check its working or...
Replies
0
Views
1,514
tonytomson
T
A
Siemens- IE/PB Link configuring as Profibus Secondary Master
For one of the projects, Customer has Profibus Network as below, Profibus Master 1 - PRM Module (Schneider) addressed (1) Profibs Master 2 -...
Replies
0
Views
3,336
amirbose
A
D
Configuring / setting up hardware - Siemens ET200s
Hi there. I'm new to the Siemens world. I'm trying to set up the PLC using the STEP 7 Software. Ultimately, after I've created a configuration...
Replies
8
Views
12,539
Permanent Beginner
P
F
Configuring Siemens Profibus network
Hi guys, I'm totally new in Siemens, currently I'm working on a proposal to add in 2 more slave node into the existing profibus network...
Replies
6
Views
4,047
flyers
F
Back
Top Bottom