dcam Lifetime Supporting Member Join Date Apr 2012 Location Merced Ca Posts 161 Jun 22, 2014 #1 cannot establish comms with my slc-5 with rs 232 or rj 45???
bernie_carlton Lifetime Supporting Member + Moderator Join Date Apr 2002 Location Yakima, Washington Posts 6,413 Jun 22, 2014 #2 You must be very specific about which unit you have. "SLC-5" does not identify any specific unit. Please provide the complete model number. Then we can help. Or just take a picture of the front and the label on the side and post them.
You must be very specific about which unit you have. "SLC-5" does not identify any specific unit. Please provide the complete model number. Then we can help. Or just take a picture of the front and the label on the side and post them.
Mickey Lifetime Supporting Member Join Date May 2003 Location Palmdale,Ca Posts 10,659 Jun 22, 2014 #3 Also if you have a copy of the offline program zip it and post here, if you can. This will help us determine how the comm ports are configured.
Also if you have a copy of the offline program zip it and post here, if you can. This will help us determine how the comm ports are configured.
dcam Lifetime Supporting Member OP Join Date Apr 2012 Location Merced Ca Posts 161 Jun 22, 2014 #4 sorry for the incomplete description. Had equipment down. ended up being serial cable....was panicing. Thanks, you guys are great.
sorry for the incomplete description. Had equipment down. ended up being serial cable....was panicing. Thanks, you guys are great.