B&r plc rebooting

hello experts,
I am trying to used the program on CF card from old B&R Power Panel 4PP220.1043-75 with 3IF786.9 ePCI card.
The new 4PP220.1043-75 has 3IF789.9 ePCI card.
Problem is the the program does not run at all!
Is there any way I can modify the CF program for this hardware change of ePCI card??
Any help is welcome.

Thank you!

B&R Power Panel 4PP220.1043-75 with 3IF786.9 ePCI card.

hello experts,
I am trying to used the program on CF card from old B&R Power Panel 4PP220.1043-75 with 3IF786.9 ePCI card.
The new 4PP220.1043-75 has 3IF789.9 ePCI card.
Problem is the the program does not run at all!
Is there any way I can modify the CF program for this hardware change of ePCI card??
Any help is welcome.

Thank you!

Hi,
I am afraid you need the programming system (AS, Automation Studio) and the original project.

You need to replace in the programming system the communication card. It can not be done different.

BR
BB